F9 Efflo 1 Gallon
$49.00
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
F9 Calcium and Efflorescence Remover is a user friendly, full 31.45% strength muriatic acid replacement. This product combines a buffered, pleasant smelling acid along with an excellent soaping capability to work better at lower concentrations. F9 Calcium and Efflorescence Remover gives the user the advantage of a full strength product while greatly reducing fuming and corrosion, thereby improving overall health and safety risk profile.
F9 Calcium and Efflorescence Remover Product Features:
-Does not Burn Intact Skin
-Up to 95% Less Fumes than Full Strength HCL Acid
-Works Better than Full Strength Muriatic Acid with Less Harmful Effects
-Quickly Removes Efflorescence, Calcium, Calcium Carbonate and -Hard Water Stains
Uses:
Concrete and Masonry: Use to clean efflorescence and calcium. At stronger concentrations, use to etch concrete in preparation for painting or coatings. At diluted ratios, use as a general cleaner. Removes excess mortar from brick and mud stains.
Application instructions:
Always Add Acid to Water, NOT Water to Acid
Pre-Cleaning: If necessary, power wash surface to be cleaned using a commercial grade pressure washer, degreaser and surface cleaner to remove oil and debris. An alkaline concrete cleaner may be used. Rinse well. Cleaning the concrete first will remove loose dirt and debris, clearing the path for better cleaning.
Dilution Ratios (Water to Product):
For Concrete, Brick, Paver, Grout & Masonry
Thick Calcium Stains and Concrete Prep for Coatings: 1:1 up to 4:1
Medium Calcium Stains: 4:1 up to 8:1
Light Calcium Stains: 8:1 to 12:1
Powdery Efflorescence Cleaning 12:1
General Cleaning 8:1
Cleaning Instructions:
For Concrete, Brick, Paver, Grout & Masonry
1. Add 1 part F9 Efflorescence and Calcium Remover to proper ratio of water. (Since F9 HWSR has many uses, it is up to the Applicator to determine proper dilution ratios. F9 HWSR can be applied straight up to a 12:1 dilution).  Always pour cold water into the bucket first, then add product. Always test first to confirm compatibility and desired strength. F9 HWSR CAN ETCH MASONRY. ALWAYS TEST FIRST!
2. Mist surface with water so it is damp, but not puddling.
3. Spray product on surface to be cleaned using a pump up sprayer, hand held sprayer or the F9 Hand Carry Electric Sprayer. Surface should foam immediately.  Let dwell 20 seconds to 3 minutes. Do not let product dry.
4. Scrub surface as necessary with a hard bristled brush or broom. Let dwell another 1-15 minutes. Neutralize surface. Power wash with fan tip or surface cleaner if needed. Do not let product dry.
5. Analyze results, repeat application if needed and adjust dilution according to desired results.
6. Several mild individual applications are better than one overpowering dose. Always pressure wash and flush the surface after application
Coverage on Porous Surfaces: One gallon of F9 Calcium and Efflorescence Remover covers 200-400′ of porous masonry and up to 1,200’ of sealed or non-porous masonry.  Application rates will vary depending on the amount of staining, porosity of the substrate and if the surface was sealed.
Suitable Substrates:Â F9 Efflorescence and Calcium Remover can be used on a variety of surfaces, including concrete, bricks, pavers, limestone, sandstone, riverstone, exposed aggregate, stucco, shingles, EIFS, glass, synthetic stone, anodized aluminum, unpolished marble and other surfaces.
Unsuitable Substrates: May not be suitable for polished or glazed surfaces. Not for use on metallic or other synthetic coatings or films. Do not use on acrylic and polycarbonate sheet glazing. Always perform a test to ensure compatibility.
Always test a small area first to confirm compatibility.
Related Products
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
F9 Calcium and Efflorescence Remover is a user friendly, full 31.45% strength muriatic acid replacement. This product combines a buffered, pleasant smelling acid along with an excellent soaping capability to work better at lower concentrations. F9 Calcium and Efflorescence Remover gives the user the advantage of a full strength product while greatly reducing fuming and corrosion, thereby improving overall health and safety risk profile.
F9 Calcium and Efflorescence Remover Product Features:
-Does not Burn Intact Skin
-Up to 95% Less Fumes than Full Strength HCL Acid
-Works Better than Full Strength Muriatic Acid with Less Harmful Effects
-Quickly Removes Efflorescence, Calcium, Calcium Carbonate and -Hard Water Stains
Uses:
Concrete and Masonry: Use to clean efflorescence and calcium. At stronger concentrations, use to etch concrete in preparation for painting or coatings. At diluted ratios, use as a general cleaner. Removes excess mortar from brick and mud stains.
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
F9 Battery Acid Restoration Cleaner (BARC) is specifically formulated to remove BOTH battery acid staining AND rust stains. This includes the entire spectrum of the rust family- thin, thick, topical, embedded, and fertilizer staining.  F9 BARC rust remover is easy to apply and does not require scrubbing, brushing or elbow grease. BARC is ready to go upon arrival and does not require mixing. F9 BARC chemically locks into the concrete, reversing 80-100% of the orange staining and restores concrete to its natural bright gray color.
Benefits of F9 BARC
- Professional Power Washing is the Preferred Method of Cleaning Your Concrete Prior to Application of F9 BARC Rust Remover.
- Concentrated and Formulated to Go a Long Way
- Quickly and Easily Removes Orange Battery Acid Burn, Rust and Fertilizer Stains
- Biodegradable, Non-Abrasive, Non-Flammable
- Restores Concrete to Its Natural Bright Gray Color
- Does Not Involve Mixing, Brushing or Messy Pastes
- Does Not Lose Strength Over Time
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
This organic cleaner will remove oxide formed stains (i.e. rust from sprinklers) from bare and coated concrete surfaces. When used on interlocking pavers, the surface will not be etched thus protecting the paver’s colors.
Features
- Eliminates ugly brown stains formed by rust or fertilizers on concrete surfaces
- Will not etch surface of pavers in order to protect richness of pavers’ colors
Applications
- Removes sprinkler and fertilizer rust
- Use in spray bottle to remove rusty stains from sprinklers on walls
- Paver and concrete cleaner
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
Cobble Clean is a concentrated eco-friendly blend of biodegradable solvents and detergents formulated for heavy duty degreasing and dirt removal. Use to remove oil, grease stains, chewing gum, and tire marks.
Features
-
Commercial grade cleaning formulation
-
Can be diluted 15 to 1
Applications
-
Remove tire marks
-
Used for commercial property maintenance as well as homeowner cleaning
-
Cleans any walking or driving surface (concrete, stone, paver)
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
This will make the concrete absolutely “POP”, remove tire marks, soils and grime in the process.  It is used when topical oil stains have been pre cleaned and the stains are actually at or beneath the surface of the concrete.  When using this maintenance cleaner, your customers will be telling you that they have never seen their concrete so clean… and this clean will last longer than when using ANY and I mean ANY high pH cleaner.  Concrete cleaned with F9 Groundskeeper will stay cleaner longer and be easier to clean the next time around.  From my personal experience and from what other contractors who have been using F9 Groundskeeper are reporting, after cleaning the same concrete 2-3x with F9 Groundskeeper, the time spent cleaning the same contracts have been reduced by 25-40%.  This is Big! Time is money! Typical dilution for F9 GK is never less than 10:1.  Normal dilution is 10:1 to 15:1.
Ideal for:
Soils
Tire marks
Entrances & exits
High traffic areas
Maintenance cleaning
Much more!
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
Multipurpose Cleaner, Degreaser and Neutralizer
For:Â Oil, Hydrocarbon, Food Stains, Tiremarks, General Surface Accumulations.
Do not use on Asphalt.
GENERAL CLEANING INSTRUCTIONS
For use on Concrete, Bricks, Pavers, Tile, Stone, Grout Masonry Hard Surfaces and most surfaces in general. Great for food grease, oils, dumpster pads, loading docks, gas stations, parking garages, tire marks and general cleaning of many surfaces.
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
The degreaser that EVERYONE is raving about is Gold Assassin. Although Gold Assassin has various applications, it excels in clearing dirt and buildup from some of the most difficult places. 1-, 4-, 5-, and 55-gallon containers Kit accessible Gold Assassin is the solution for removing stains from driveways, petrol stations, drive-thrus, and dumpster pads.
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
Many things can cause rust, but iron-containing metals or fertilizers are the main culprits. The majority of concrete rust rarely penetrates deeper than 1/16″ into the concrete.
Orange flash acid, which comes from orange battery acid, can “burn” down your driveway and into the street. Although it seems almost exactly like rust, flash acid burn is fundamentally different. Unfortunately, if your battery acid is white, it may stain the entire slab and there is no treatment that can get rid of the white stain.
The most severe rust, fertilizer stains, and orange battery stains are GUARANTEED to be removed with F9 BARC.
F9 is compatible with many materials, including CONCRETE, BRICKS, PAVERS, TILE, STONE, STUCCO, ASPHALT, VINYL, SIDING, SHINGLES, RUBBER, SIDEWALKS, and more.
USE NOT ON GLASS
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
Cobble Prep is an eco-friendly formulation containing no muriatic or phosphoric acid and engineered to clean unsealed paving stones and concrete and prepare surfaces for sealing. This highly concentrated blend will remove efflorescence (white lime residue) and surface stains resulting from fertilizer, vegetation, and mortar. Cobble Prep is economical, easy to rinse, and provides a uniform surface for sealer to be applied.
Features
- Safer than typical acids
- Contains no phosphoric or muriatic acids to wash concrete
- Eco-friendly
Applications
- Remove efflorescence (white circles or clouding)
- Rust stain removal
- Cleans berry and vegetation stains
- Etching concrete
- Remove stubborn, hard-to-remove stains from concrete, stone, brick pavers and other surfaces
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
Multipurpose Cleaner, Degreaser and Neutralizer
For:Â Oil, Hydrocarbon, Food Stains, Tiremarks, General Surface Accumulations.
Do not use on Asphalt.
GENERAL CLEANING INSTRUCTIONS
For use on Concrete, Bricks, Pavers, Tile, Stone, Grout Masonry Hard Surfaces and most surfaces in general. Great for food grease, oils, dumpster pads, loading docks, gas stations, parking garages, tire marks and general cleaning of many surfaces.
THIS ITEM CANNOT BE SHIPPED, IN-STORE PICKUP ONLY.
This will make the concrete absolutely “POP”, remove tire marks, soils and grime in the process.  It is used when topical oil stains have been pre cleaned and the stains are actually at or beneath the surface of the concrete.  When using this maintenance cleaner, your customers will be telling you that they have never seen their concrete so clean… and this clean will last longer than when using ANY and I mean ANY high pH cleaner.  Concrete cleaned with F9 Groundskeeper will stay cleaner longer and be easier to clean the next time around.  From my personal experience and from what other contractors who have been using F9 Groundskeeper are reporting, after cleaning the same concrete 2-3x with F9 Groundskeeper, the time spent cleaning the same contracts have been reduced by 25-40%.  This is Big! Time is money! Typical dilution for F9 GK is never less than 10:1.  Normal dilution is 10:1 to 15:1.
Ideal for:
Soils
Tire marks
Entrances & exits
High traffic areas
Maintenance cleaning
Much more!
Reviews
There are no reviews yet.